MG Appearance Products
Protectants
Fabric Guard D-38714
FABRIC GUARD works to keep every treated vehicle's interior looking showroom new. FABRIC GUARD forms a protective layer against fading, discoloration and deterioration caused by harsh sunlight, extreme temperatures, water and age
Leather / Vinyl Guard D-39244
VINYL & LEATHER GUARD keeps vinyl and leather surfaces soft and stain-free while protecting them against cracking, fading and discoloration. VINYL & LEATHER GUARD dries to a soft, resilient, non-tacky finish.
TEC580 XPC3® Ceramic Coating
TEC580 Ceramic Coating is the purest form of surface protection you can apply to your vehicle. Coatings form chemical bonds to the applied substrate, which become both chemically and wear resistant. These chemical bonds are hard to break once cured and give outstanding performance characteristics. The liquid ceramic coating will provide years of protection against all types of environmental attacks. The ceramic resin acts like an additional layer of clear coat which gives increased depth of gloss and enhanced color. Ceramic coating creates an almost non-stick layer which reduces the adhesion of dirt, grime and bugs. The cured ceramic coating is extremely hydrophobic, chemical & scratch resistant.
TEC581 XPC3® Ceramic One Step Polish
TEC581 Ceramic Polish is the first polish to contain ceramic surface material. The polish can be used as a standalone or as an excellent choice for preparing any vehicles surface for TEC580 or TEC582 application. Ceramic polish contains fine milled polishing agents to give a consistent cut throughout the buffing cycle, while ceramic material is deposited into the pores of the clear coat. This is perfect for light cutting of new & used vehicles. The ceramic material deposited acts as a base layer for additional ceramic application, either liquid or spray. The base layer works synergistically with either the liquid or spray, so there is no need to have an additional prep step prior to additional ceramic application.
TEC582 XPC3® Ceramic Detail Spray
TEC582 Ceramic Detail Spray is one of the easiest ways to get ceramic protection. The product can be used as a standalone, with the Ceramic One Step Polish to aide in removal, or as a Ceramic Coating booster. TEC582 delivers exceptional gloss and slickness to the treated surfaces, along with unparalleled surface protection this can also be used over & over making it a must for express detailing. The product can be used on both wet and dry vehicles. The formula is highly substantive so only a few sprays per panel is needed for adequate coverage. The versatile product can be used on all exterior surfaces, including glass, plastic trim, chrome, moldings, and wheels.
TEC583 XPC3® Ceramic Wheel Protectant
TEC583 XPC3® Ceramic Wheel Protectant is the easiest way to get ceramic surface protection on OEM and aftermarket wheels. Once sprayed onto the wheel, the product instantly begins to bond to the surface giving maximum protection and gloss. The treated surface will resist road dirt, grime, and brake dust and make future cleanings easier. The protection is seen with the tight water beading and the wheel will have more luster. Will last up to 3 months under normal driving conditions.
TEC426 Aqua Glow®
Our latest innovation to cut drying time & protect vehicle. Works on both just rinsed or clean, dry vehicles. Just spray and buff into a high gloss finish. Won™t streak-even with a terry cloth towel, lasts up to (4) months & is very easy to apply. Safe for glass or trim as well.
MG Appearance Products